Specials

The equipment listed on this page is offered at special reduced prices!  Delivered prices must be quoted by your local Woodhouse dealer and may include freight and set-up.  Limited quantities are available and subject to prior sale.

Please contact us for a referral to your local dealer or with any questions that you might have.  Literature is available upon request.

1314 Union Street, West Springfield, MA 01090
Tel: 413-736-5462   FAX 413- 732-3786
e-mail: info@jswoodhouse.com

Model No. Description

Weight
(lbs)

Special
List Price

Normal
List Price

TSA550

Ferri boom Model TSA550 with a maximun reach of 18' 1" for tractors 110 hp and a minimum tractor weight of 7,940 lbs. The mower includes a model TNS125 49" flail head. The head is kicked forward 5' 2" so it is close to the operator. An oil cooler is standard equipment.

This mower is fitted with hammers, Delta Yoke and Stabilizers for mounting.

The boom mower is mounted higher on the frame to allow the mower to go over guard rails or fence. This mower is also fitted with Lift Float Kit & Bumpers with Illumination.

A concession on the freight will be considered by Ferri. SN #98433 machine, #97047 head. Machine is located in Ontario, Canada. New and stored inside.

2930 $32,500 $47,810
TSKID2000

Ferri TSKID Flail Head for skid steer with working width of 79" fitted with hammers. Requires minimum of 20 gal per minute and 2755 to 3045 PSI. Machine has parallel linkage for better floating on uneven grounds. Will cut material up to 2". This is a demo machine and has been run once. SN#A6113

1720 $10,039 $15,791
ZLE2000

Ferri ZLE2000 Slope Mower fitted with hammers or Multiuse blades with mowing width 6’, 6” for tractors 70 to 100 hp. Gearbox located outside the transmission cover for more side-sliding. Mower has mechanical breakaway and floating frame following the ground contours. Machine has some minor scrapes and a couple minor dents. New and full warranty. Sn# A9908

1598 $13,276 $14,751
ZT2300

Ferri ZT2300 slope mower has a cutting width of 7’5” with hydraulic side shift. Side shift = 10’4”. This model requires a tractor with a minimum weight of 6,190 lbs with 70 to 80 engine HP. The mower has a mechanical breakaway. This is a used reconditioned machine with no warranty. SN# 98533.

1444 $9,283 $11,737
ULF-355

Worksaver 3000 lb capacity front loader/rear hitch 55" pallet forks with 3" x 2" adjustable internally patented reinforced 55" tubular forks, forks adjust to 56" apart.  Note: pin-on front loader brackets or QA brackets are extra and must be priced separately.

395 $950 $1,209
AS30 30

Brinly 30" width tow behind aerator/spreader combination. 70 lb / 1.27 cu ft capacity, 96 galvanized steel tine tips, hopper made from heavy duty 18 gauge all welded steel to prevent twisting and flexing. Calibrated flow control with adjustable stop feature, differential direct chain drive to prevent skips, built tough with extra heavy duty ¼" diameter tubular steel framing & drawbar. 9 x 1.75" transport wheels, single lever engagement, 2 year warranty.

60 $235 $263
AS40

Brinly 40" width tow behind aerator/spreader combination. 100 lb / 1.27 cu ft capacity, 132 galvanized steel tine tips, hopper made from heavy duty 18 gauge all welded steel to prevent twisting and flexing. Calibrated flow control with adjustable stop feature, differential direct chain drive to prevent skips, built tough with extra heavy duty ¼" diameter tubular steel framing & drawbar. 9 x 1.75" transport wheels, single lever engagement, 2 year warranty.

70 $265 $349
HDC10L

Brinly Hardy model HDC10L tow behind 10 cu ft. cart (Heaped) capacity. 650 lb. load limit with square design and 14” X 4” wheels

72 $150 $192
EM-513

Estate 60" Rear Discharge Finish Mower pull type - 13hp Briggs & Stratton Intek OHV engine with electric start less battery, 5 position hitch for offset mowing, 3 standard 22" blades for 60" cut, remote blade control, single belt drive system, replaceable belt without assembly, precision welded 1/8" tubular frame, 1/8" plate reinforced deck, 3/4 high speed HD serviceable spindles, electric blade clutch, 4 independent locking casters for long and short turning radius, side rub rails to protect trees.

400 $2,315 $3,035
PA-48F

Ferguson 48" 3-point Coring Aerator  with drum capacity of 12 gallons

185 $850 $1,195
DC06HPX

Firebird Deluxe fiberglass sunshade kit designed to fit older style John Deere HPX Gator and XUV series Gators - dimensions 55" wide x 49" long, overall height 72" (approx based on standard), durable fiberglass construction, hi gloss gel coat finish with UV inhibitors, sturdy frame mount design, oversized protection for maximum coverage, simple rubber isolated mounts reinforced for added strength, underside is sound absorbing, black fiberglass, attractive & effective without restricting visibility.  Available in green & trail olive.

70 $360 $374
DCHPX

Firebird Deluxe fiberglass sunshade kit designed to fit older style John Deere HPX Gator without roll bar - dimensions 55" wide x 49" long, overall height 72" (approx based on standard), durable fiberglass construction, hi gloss gel coat finish with UV inhibitors, sturdy frame mount design, oversized protection for maximum coverage, simple rubber isolated mounts reinforced for added strength, underside is sound absorbing, black fiberglass, attractive & effective without restricting visibility.  Available in green & trail olive.

70 $360 $374
09M4PDM / 09094907 / 09095917

Gandy steel row Positive Displacement Metering applicator, 45 lb capacity with 4-outlets, 12-volt electric drive, set of 12 rate control sprockets to regulate application rates, half-rate metering wheels and spacers in place, metering cups, full length and half slide closures

40 $892$939
09M902R

Gandy Jumbo 2-outlet 45 lb capacity steel applicator hopper only with 10” rubber rotor bar and sealed bearings, stainless steel hopper bottom and slide for easy cleaning, sight window, bolt-on mounting for easy removal, cam-type rate gauge.  Note add optional 12-volt electric motor drive to complete. Motor not included.

21 $312$362
09M904WP12

Gandy 45 lb Steel Hopper Forage Additive Applicator with cam gauge metering, four-outlet, stainless steel bottom and slide, straight spout, 10” rubber rotor, u-frame mounting bracket and two spout caps, 1/64 hp 12-volt motor included and assembled in place.

43 $610$641
09S902

Gandy Super 2-outlet 35 lb capacity steel applicator hopper only with 8” stainless steel rotor bar and sealed bearings, stainless steel hopper bottom and slide for easy cleaning, sight window, bolt-on mounting for easy removal, cam-type rate guage.  Note: add optional 12-volt electric motor drive to complete. Motor not included.

19 $199$249
1012T

Gandy 12-ft Tow Drop Fertilizer Spreader, 1200 lbs approx capacity, 15 x 5K 6-bolt rims (no tires), 36 diamond-shaped openings 1-1/2” long / spaced 4” apart, hot-rolled steel removable hopper bottom and hinged rate-control slide, adjustable spread plate, hand lever shutoff, weather-tight removable and reversible covers with spill-guards and dual lock-down latches for each cover, powder angles included, heavy-duty tractor hitch with extension at rear for trailing non-ground engaging machines

753 $4,950$5,208
Hawk 25 PTO (09320)

Hakki Pilke Firewood Processor - will wplit wood up to 9.84" in diameter and 15.75" in length. 3.9 tons of splitting force. 3-point PTO driven

915$7,495 $9,553
Easy 42 (61401)

Hakki Pilke Firewood Processor - will wplit wood up to 16.5" in diameter and 23.6" in length. 15 tons of splitting force. 3-point PTO driven

2579$26,680 $29,640
203 & 92

9" Kesla model 203 Log Loader with model 92 Forwarding Trailer   The 203 loader has an outreach of 17ft, includes proG 20 grapple, rotator, control valve and stabilizers. The 92 Trailer has a maximum load capacity of 9 tons, hydraulic articulation with 2 cylinders, 3 crossbeams with stakes, head rack including wheels 400/60 x 15.5/14 ply

203 ldr 2090 lb --------- 92 trlr 2640 lb $23,350 $24,350
RW9

9" Vacuum Hose  we have inventory of (3) 25 foot lengths

$7 $16
SL-2024-T

9" Shaver Log Splitter  3-Pt Cat I or II splitting logs in a horizontal position up to 24" in length. Standard with 4-way blade. Splitting cylinder 5" x 24". Power rating at 2000PSI 20 ton / 2500PSI 25 ton / 3000PSI 30 ton.

632 $2,330 $2,730
TS500T

Sitrex TS500T tow type fertilizer spreader with clevis hitch, 23 x 8.5 x 12 Turf Tires. The spreading width is 19 – 60 ft and a hopper capacity of approximately 800 lbs.

286$1,350 $1,805
C350M

Sundown Gravity Feed Chipper with chipping capacity of 3.5” diameter material with 2 reversible knives and left or right chip discharge. This 3-Point tractor mounted chipper is ideal for homeowners, farmer’s property and large property maintenance. The C series wood chippers have commercial grade components such as double sided knives, standard chip anvil, a top discharge chute and industrial urethane finish.

375$3,130 $3,460
C550M

Sundown Gravity Feed Chipper with chipping capacity of 5.5” diameter material with 4 reversible knives and left or right chip discharge. This 3-Point tractor mounted chipper is ideal for homeowners, farmer’s property and large property maintenance. The C series wood chippers have commercial grade components such as double sided knives, standard chip anvil, a top discharge chute and industrial urethane finish.

650$4,405 $4,840
C551H

Sundown Hydraulic Feed Chipper with chipping capacity of 5.5” diameter material and 4 reversible knives, 360 degree chip chute rotation. This 3-Point tractor mounted chipper has the strength to handle any material that will fit in the large 5.5” hopper opening. The hydraulic feed chipper is PTO driven and features a high-speed rotor design traditionally only available on commercial engine drive chippers for great power and efficiency.

775$7,115 $7,410
12-1000

Tebben Step UP: Tired of crawling on your knees to get into pickup boxes? Now you don’t have to with the new step up system!! Pull the spring loaded pins, swing the step-up system out and it locks into place. Providing a safe, secure, non-slip step.

Close the tail gate, pull the spring loaded pins, swing the steps back and they lock into place. Providing a step on either side of the box.

30$144 $215
WR80-71SD

Westfield 8" diameter x 71' long PTO drive transport auger with rims and tires, fully setup. Auger is new but weathered. Stored in Middleport, NY. PTO shaft drive model features a gearboz connected directly to the auger driveshaft with a flex coupler & shear bolt for the most positive auger drive available. The gearbox can be flipped for right or left hand drive. A non-separable 60" PTO driveline (extends to 80") an a handy driveline transport saddle are standard.

1860$6,650 $8,485
MCR-7

Worksaver 7-ft landscape rake Cat I for tractors up to 40 hp. 3 forward rake positions - 2 reverse rake positions. Tine size 5/16" x 1". Frame size 3" x 2.5" formed channel. Tine bar size 3.5" x 2.5"

199$650 $779
PS1553T

Vicon Maquinas trail type Pendulum Spreader with 43 bushel hopper and 3250 lbs capacity. Tires are included.

792$4,995 $7,650